News | stainless steel jacketed reactor

What Should I Do If Sigma Mixer Leaks Oil? | JCT Machinery

1. Check Seals First check the seals of sigma mixer, including shaft seals, sealing rings, etc., to ensure that they are not worn, aged or damaged. If any problem is found, replace the seal in time. 2. Check Bearings Check sigma mixer's beari

Mar 18,2024

Sigma Mixer Shaft Wear Repair | JCT Machinery

Why is there wear and tear? Wear on the bearing positions and bearing chambers of sigma mixer is generally caused by component dimensional tolerances, assembly processes, and wear in heacy-load operating environments. Once wear occurs, it will inevitab

Mar 15,2024

Common Faults And Solutions Of Sigma Mixer | JCT Machinery

1. Sigma Mixer Motor Cannot Start Normally or Runs Unstable Power Failure : Check whether the power cord is in good contact and whether the power switch is turned on. Motor Failure : Check whether the motor has circuit or winding open ci

Mar 14,2024

Paint Production Line Machine | JCT Machinery

What is paint? Paint is a coating that usually consists of pigments, solvents, resins (or polymers) and auxiliary additives. It is widely used to coat and protect surfaces, improve appearance and provide anti-corrosion, weather resistance, waterproofin

Mar 13,2024

Electric Heating Reactor | JCT Machinery

Why choose electric heating reactor? The electric heating reactor has the characteristics of rapid heating, high temperature resistance, corrosion resistance, hygiene, no environmental pollution, no need for autoomatic boiler heating, easy use and low

Mar 12,2024

Sigma Mixer Design And Operation | JCT Machinery

What is sigma mixer? Sigma mixer is a kind of equipment widely used in pharmaceutical, chemical, metallurgy and other industries. It is mainly used for mixing, kneading, pressing and other processes of various powder or granular materials. Sigma mixer

Mar 11,2024

Silicone Sealant Production Line Equipments | JCT Machinery

Silicone Sealant Production Line Equipment Configuration 1. Base material dispersing mixer / Vacuum kneader 2. High viscosity pump 3. Base storage tank 4. Heating system (optional) 5. Vacuum system 6. Three roller grinding machine (optio

Mar 08,2024

Polyvinyl Acetate VS Polyvinyl Alcohol | JCT Machinery

1. Monomer Composition Polyvinyl Acetate: It is derived from the polymerization of vinyl acetate monomers. The repeating unit in the polymer chain is the vinyl acetate group (CH3COOCH=CH2) Polyvinyl Alcohol: It is synthesized by the hydrolysis of po

Mar 07,2024

Alkyd Resin Characteristics And Applications | JCT Machinery

1. Versatility Alkyd resins are known for their versatility and can be modified to achieve a wide range of properties. By varying the types of polyhydric alcohols, acids or modifying agents, the properies of the alkyd resin can be tailored for specific

Mar 06,2024