How is the making steps of silicone sealant( glass cement) production line?
Author: source: Datetime: 2017-08-05 15:15:59
Silicone sealant, also known as glass cement, based on polydimethylsiloxane as the main raw material, is a paste consisted of cross-linking agent, filler, plasticizer, coupling agent, catalyst mixed in a vacuum state. It solidifies at room temperature with water in the air to form elastic silicone rubber. How is the making process of silicone sealant( glass cement) production line?
2) The base materials will come to the base material storage tank by the high viscosity pump, slowly adding these materials to the three roller grinding machine, to achieve the fineness requirements.
3) After grinding of the base materials, put the materials into the mixing cylinder. And then, adding other ingredients and paste.
4) The mixing cylinder will be pushed into a multifunctional dispersing machine, starting stirring and high-speed dispersing. At the same time, starting the vacuum system, drawing out the moisture and air from the materials. Start the cooling system to control the temperature of the materials.
5) After the production is finished, the mixing cylinder is pushed into the hydraulic discharging machine, and materials are transported to a material cylinder of the packaging machine;
6) Putting the bucket into the packaging machine and then filling. Packing the finished products into the warehouse.
To make silicone sealant, you should firstly make its basic materials, then make the sealant. Any requirements about the making process of silicone sealant( glass cement) production line you can feel free to contact us!