Welcome to Reactor project manufacturer from Foshan JCT Machinery Co.,Ltd.

0086-13929992673

[email protected]

Home > News

News
Hot Products
Contact us

Email: [email protected]

Phone:0086-13929992673

Address: Wufuwei Industrial Zone, Pingzhou Nanhai,Foshan City, Guangdong Province,China

look here! Stirring form and temperature description of stainless steel electric heating reactor

Author: source: Datetime: 2019-07-03 17:11:29

Stainless steel electric heating reactor is believed to be quite familiar to everyone, but for those who have entered the business, or who have not heard of it, they are different. The reactor is a typical main reaction equipment produced by the chemical industry. It can be seen in the industry, so let's take a look at the electric heating agitation form and temperature control instructions.

NEWreactor6.jpg


    Temperature: Electric heating reactor Generally speaking, the temperature is not higher than 100 degrees, which is the direct heating of the heating wire at the bottom of the kettle, which is very common in current applications. The principle of the electric heating reaction kettle is to insert the electric heater into the jacket heat transfer oil, and use the heat transfer oil as a medium to be introduced into the kettle, so that the materials in the kettle are heated to react.

 Structurally: The electrically heated reactor generally has a volume of less than 3 tons, because the volume exceeds 3 tons, and the heating rate is slow, which affects production efficiency.

    The pressure of the reactor produced by Jinhaotai Machinery is between 0.7Mpa, and there is a stainless steel reactor agitating form: mainly inclined blades: the inclination is between 45-60 degrees; anchor blades: the most widely used, with scraped bottom Widely applicable; Dispersing disc type paddle: It can be used for paint coating or powder mixing, for shearing, speed is 1000/1500/2800 rpm, variable frequency; ribbon type blade: for high viscosity Material, with dispersing disc, can be used for the production of hot melt adhesive materials.

 Jin Chang Tai Chemical Machinery Co., Ltd.
Welcome to our website: http://www.mixmachinery.com/
Phone: +86-18028192312        0086-18028192312 

Mailbox: [email protected]
Thank you very much!