Welcome to Reactor project manufacturer from Foshan JCT Machinery Co.,Ltd.

0086-13929992673

[email protected]

Home > News

News
Hot Products
Contact us

Email: [email protected]

Phone:0086-13929992673

Address: Wufuwei Industrial Zone, Pingzhou Nanhai,Foshan City, Guangdong Province,China

Insights into what is Silicone sealant production line

Author: source: Datetime: 2018-04-10 17:37:12

silicone glue

Silicone sealant production line characteristic

1)Silicone sealant equipment produced by JCT company,Advanced design and excellent manufacture,Reasonable structure,Easy to operate,Fewer production personnel, high production efficiency, good product quality,Suitable for the production of a variety of silicone sealant.

2) JCT mechanical equipment Co., Ltd. is a research, development, design, manufacture, installation, debugging in one of the chemical machinery and equipment manufacturers. Have experience in design and manufacture of silicone sealant production equipment more than 15 years.

Production line of neutral silicone rubber  type 2

Silicone sealant Production process:

1)preparation of raw materials according to the formula,Add to the base disperser (or kneader),Powder can be divided into 2-3 times.By mixing, the friction between the material to raise the temperature, stir mixing evenly. Start the vacuum system and draw the water from the material.

2)the production of the base material through the high viscosity pump to the base material storage tank, slowly added to the three roller grinding machine, to achieve the fineness requirements.

3After the grinding of the base material into the mixing cylinder, and then add other ingredients and paste.

4)the mixing cylinder will be pushed into a multifunctional dispersing machine, Start stirring and high speed dispersing. Start the vacuum system, draw out the moisture and air in the material.Start the cooling system to control the temperature of the material.

5)After the production is completed, the mixing cylinder is pushed into the hydraulic discharging machine and is divided into a material cylinder of the packing machine.

6put the bucket into the packing machine and then filling.

7Packing the product into the warehouse.

If you want to know more about silicone seleant production line, free contact JCT Machinery as soon as possible.

JCT contact ways